E-Glass Direct Roving
This roving is specially designed as reinforcements for thermoset resins used in filament winding and pultrusion process, hand lay-up and particular application in self-supporting drop wire.E-Glass Direct Roving
This roving is specially designed as reinforcements for thermoset resins used in filament winding and pultrusion process, hand lay-up and particular application in self-supporting drop wire.
Technical Requirements: 
R2O content:≤0.80％
Coupling agent:Silane
Compatible resin:Polyester Vinylester or Epoxy resins
Moisture:≤0.10％
Loss on ignition:O.55％±0.20％
Fiiament diameeter:11-24μm
Linear Density: 300- 4800 TEX.
Special products are according to customers requirements.
Indicidual and bulk packaging:
Each bobbin is protected by a plastic bag, if required, thermoplastic bag also can be used, then covered by a box with the size of 278mmx278mmx273mm; net weight is 16kg±1kg.
Each pallet size is 1100mmx1100mmx940/1200mm contains 3 or 4 levels of 16 bobbin.
Static stacking of the pallets is possible up to two high.
Creel packaging is available on request.
Storage
EC roving should be stored dry and in its original packaging. The best conditions are temperature between 10℃and 35℃ and at a relative humidity between 30% and 70%.
