FRP Surface Tissue
Surfacing mat is mainly used in the surface layers of FRP products, It is divided into winding S-SM series and hand sticking S-HM series.FRP Surface Tissue
Surfacing mat is mainly used in the surface layers of FRP products, It is divided into winding S-SM series and hand sticking S-HM series.
Product Feature
Uniform fiber dispersion
Smooth surface, low binder content,
Fast resin impregnation
Good mould obedience
Application
S-SM are mainly used on pipe and tank winding products. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance and longer service life.
S-HM is chiefly used in the product with complicated geometric curve. It has the advantages of good pattern fitness, quick resin permeating. It can raise the intensity and corrosion resistance of the products. It is the essential content of the fiberglass products and high quality pattern.
Technical Specification
|
Item |
Unit |
Type |
|||||
|
S-SM2030 |
S-SM3030 |
S-SM5030 |
S-HM-30 |
S-HM-40 |
S-HM-50 |
||
|
Area Werght |
g/m2 |
20 |
30 |
50 |
30 |
40 |
50 |
|
Binder Content |
% |
7.0 |
6.0 |
6.0 |
7.0 |
6.0 |
6.0 |
|
Penetrating time(two layers) |
S |
＜8 |
＜10 |
＜16 |
＜10 |
＜15 |
＜20 |
|
Tensile strength MD |
N/5cm |
≥20 |
≥25 |
≥40 |
≥20 |
≥25 |
≥30 |
|
Moisture Content |
% |
18 |
18 |
20 |
18 |
16 |
20 |
|
Strand Measurement |
m×m cm cm |
1.35×2500 ＜100 15 |
1.35×2500 ＜100 15 |
1.35×2500 ＜100 15 |
1.35×2500 ＜117 15 |
1.35×2000 ＜100 15 |
1.35×2500 ＜100 15 |
Note: The products with user’s specification can be made.
Packaging
Roofing mat is wound onto a paper tube and then wrapped up with plastic film, which can be wrapped up with kraft paper. The rolls are to be vertical placed.
Storage
Product shall be placed under dryness condition and the covering membrane shall be no opened until applying.
